Bison Silicone High-Temperature Sealant Red Card 60 ml (300 deg) (BIS-6305454)

• Heat resistant upon complete curing up to 260C and briefly (approximately 1 hour) up to a maximum of 300C
• Easy to apply, Not paintable
• Sealant may expand when it comes into contact with grease, oil, coolant and fuels.

Instruction to Use:

• Inject sealant evenly and slowly into the joint. Immediately smooth with a finger and soapy water. For bonding, join the parts within 5 minutes. After approx. 5 minutes, surface skin will form. Bison High Temp reaches its high heat resistance after fully curing. The curing can be accelerated by heating the sealant to a maximum of 150C.
• Points of attention: Silicone hardens under the influence of humidity. Contact with humidity is therefore absolutely necessary during curing.

Storage conditions:

Store upright and well-closed at a temperature between +5C and +25C.