Bison Car Mirror Blister 2 ml (BIS-6305425)

• Fast & Waterproof
• Vibration-proof

Instruction to Use:

• Do not use at temperatures below +15C. At lower temperatures, heat inside of car (windscreen)
• Mark intended position of mirror on outside of windscreen. Attention: due to tension on the windscreen, this should be the exact same position as before. Cut the enclosed mesh in the form and size of mirror base. Apply adhesive from syringe evenly and generously on mirror base. Press mesh cut to size into wet adhesive and press mirror base to marked area. Hold firmly for at least 5 minutes. Any movement of mirror base during this period will result in a bad adherence. Let cure for at least 15 minutes before adjusting mirror position.
• Points of attention: Bison Car Mirror is an anaerobic adhesive, meaning that it is designed to cure in absence of oxygen, in combination with the impregnated mesh. Adhesive outside bonded areas will not cure due to the presence of oxygen.

Storage conditions:

Store in a dry, cool, and frost-free place.