Danfoss Eaton
Char-Lynn 129-0019-002
Hydraulic Motor

Eaton low-speed, high-torque (LSHT) motors deliver reliable, energy-efficient performance in a wide variety of applications. Their industry-leading high-torque motors are available in Geroler/gerotor, piston and drive models.

Specification:
Series – J-Series
Displacement – 1.21 in/r
Maximum RPM-Continuous – 1992 rpm
Continuous Torque – 333 in
Continuous Pressure – 2030 psi
Continuous Flow Rate – 5.5 gpm
Motor Port Type – Straight Thread O-Ring SAE
Motor Port Size – 9/1618 UNF-2B
Shaft Type – Straight
Output Shaft Size – 5/8 in Straight – Square Key
Mounting Type – 5-Bolt – 1.239 in Pilot
Seal Type – Standard
Case Drain – 3/824 UNF-2B SAE O-Ring Ports
Inlet and Outlet Port Size – Straight Thread O-ring SAE 9/16-18 UNF-2B Ports Size 6
Actual Port Type – .5625-18 Unf-2B Sae O-ring Port, Side Ported
Actual Output Shaft – Dia 15.88 [.625] Straight With Straight 4.72 [.186] Sq Key With .250-28 Threaded Hole
Actual Mounting Flange – 5 Bolt: Dia 31.47 [1.239] X 5.1 [.20] Pilot .250-28 Unf Mounting
Maximum Operating Temperature – 180 F
Overall Height – 2.53 in
Overall Length – 5.80 in
Overall Width – 2.38 in
Intermittent Flow Rate – 6.5 gpm
Intermittent Pressure – 2400 psi
Peak Pressure – 3190 psi
Intermittent Torque – 405 in
Peak Torque – 425 in

Can’t Find A Part? Ask us!
We specialise in sourcing hard to find specials, oddballs & obsolete parts, get in touch if you can’t see what you are looking for.
01555 772474
[email protected]

The purchaser of these items must ensure that they are satisfactory for use in the application for which they are intended.
No responsibility can be accepted by the manufacturers if any products are incorrectly or inadequately fitted. Goods may not be exact to image shown.