Esab 1.0mm Stainless 316L Tig Welding Filler Rod 5KG pack

Bare corrosion resisting chromium-nickel-molybdenium welding rods for welding of austenitic stainless alloys of 18% Cr – 8% Ni and 18% Cr – 10% Ni – 3% Mo-types. OK Tigrod 316L has a good general corrosion resistance, particularly against corrosion in acid and chlorinated environments. The alloy has a low carbon content which makes it particularly recommended where there is a risk of intergraular corrosion. The alloy is widely used in the chemical and food processing industries as well as in shipbuilding and various types of architectural structures.

Typical Tensile Properties

As welded Elongation Tensile Strength Yield Strength 32 % 600 MPa 470 MPa

Charpy V-Notch Properties

As welded Impact Value Testing Temperature 175 J 20 C 130 J -60 C 120 J -110 C 75 J -196 C

Weld Metal Analysis

Mn Mo C Si FN WRC-92 Ni N Cr 1.7 % 2.6 % 0.01 % 0.4 % 7 % 12.0 % 0.04 % 18.2 %

Approvals: ABS, ER 316L, BV, 316L BT, CE, EN 13479, CWB, ER316L, DNV-GL, VL 316 L (I1), NAKS/HAKC, 2.0-3.2 mm, VdTV, 04270 Classifications: EN ISO 14343-A, W 19 12 3 L, Wire Electrode, SFA/AWS A5.9, ER316L, Wire Electrode, Werkstoffnummer, ~1.4430, Wire Electrode

Approvals are based on factory location. Please contact ESAB for more information.

Alloy Type: Austenitic (with approx. 10 % ferrite) 19% Cr – 12% Ni – 3% Mo – Low C