Bison Sealant Strip Sanitary White 13 mm x 3.35 m (BIS-6302090)

• Immediate bonding
• Easy to apply
• Permanently neat result
• Water-resistant & Decorative

Instruction to Use:

• Cut the sealant strip to size, observing 10-15 mm clearance. Start with the longest joint. Fold double the strip along its entire length and pull back a part of the backing tape. Place the beginning of the strip on the joint and apply the strip while firmly pressing downward.
• Please note: do not stretch the strip as you press! Cut off the excess strip at the end of the joint. Make sure the strip adheres well everywhere (especially in the tile joints), then apply the other strip(s) in the same way.
• In corners, overlap strips. Cut the overlapping pieces from the corner at an angle (45) and remove the pieces. Press the corner again firmly.

Storage conditions:

Store upright and well-closed at a temperature between +5C and +25C.