JIC Female Swept 45
Hose Tails

The hydraulic hose connectors are manufactured in accordance with various standards, including ISO, SAE, DIN, JIS, BS, and NF, to ensure a broad range of applications for hydraulic pressure hoses.

A Zinc coating and Cr-VI free zinc plating process ensures a superior corrosion resistance for all carbon steel products, which meets all necessary EU and US regulatory standards, as well as the SAE J516 and DIN EN ISO 12151 specifications. The omission of hexavalent chromium confirms an environmentally friendly result yet with no decrease in corrosion resistance.

The zinc-plating tested to EN ISO 9227 yields a minimum of 240 hours without corrosion, prior to crimping.

SAE JIC 37

Commonly referred to as JIC fittings, these metal-to-metal sealing type fittings have a 37 flare (sealing surface angle) and straight United National Fine Threads (UNF). The original design specification for the fittings comes from the Society of Automotive Engineers (SAE).

Standard: ISO 12151-5,ISO8434-2, SAE J516

Can’t Find A Part? Ask us!
We specialise in sourcing hard to find specials, oddballs & obsolete parts, get in touch if you can’t see what you are looking for.
01555 772474
[email protected]

The purchaser of these fittings must ensure that they are satisfactory for use in the application for which they are intended. No responsibility can be accepted by the manufacturers if any fittings are incorrectly or inadequately fitted, ie. torque values, pressure requirements, non-matching threads etc. USC Hydraulics assumes no liability for typographical errors or other errors. For any precise technical information you must always contact our technical department. Dimensions and Data shown may be changed without notice.